Features:

Multithane UV is a UV resistant tar free, elastomeric, single pack, moisture curing liquid polyurethane, waterproofing membrane which cures to form an elastic, high tensile and seamless membrane. Multithane UV is suitable for exposed applications such a roofs, water features, gutters and flashing AS WELL AS areas to be tiled or covered such as wet areas (shower recesses and bathrooms), decks, balconies, planter boxes and more. Multithane is quick curing, usually overnight.This is the Short description. Grey in colour.

Benefits and Advantages

Multithane UVR represents the highest standards in polyurethane waterproofing technology and provides the following benefits and advantages:

• Single pack - no mixing
• Fast curing within 24 hours)
• Suitable for direct sun light exposure USE ATC AS TOPCOAT
• Permanently flexible (tests show elasticity over 500% - Class 3 [highest class of extensibility])
• Will not stain tiles or grout - as Multithane UV is tar and bitumen free
• Self levelling and seamless membrane (no joints or laps)
• Suitable for immersion in water
• Can be directly tiled (broadcasting of sand in to final wet coat is recommended)
• Good chemical resistance
• High strength and puncture resistant
• Easily repaired and or maintained
• Odourless (subjective) when cured
• Formulated to provide long term protection
• Easy to apply
• Has good hydrostatic resistance
• Long history of Australian use

Suitable Surfaces
Multithane UV is suitable for most building substrates including:
Concrete • Cement • Cement Render • FC and CFC Sheeting •
Render • Brick • Block work • Plaster Board • Masonry • Bitumen
(when primed with Duram Primeseal) • Metal • Timber, Particle
Board and Plywood ( when primed with Duram Primeseal).
Surfaces must be made good and should be sound, stable, dry,
clean and free of dirt, dust and contaminants and suitably primed.

Coverage. The stated average coverage rate may vary depending upon type, condition, porosity, texture of the surface and application technique. Multithane UV: Generally, 1.5 to 2.0 Lts perm² for two coats combined, i.e. 0.75 to 1.0 Lts per m² per coat.

DELIVERY TO SYDNEY WOLLONGONG NEWCASTLE MELBOURNE BRISBANE AND ADELAIDE NO PO BOX

if you live outside these areas email us postcode for quote on delivery

PICK UP SYDNEY - EASTERN CREEK

QUEENSLAND - VIRGINIA